Drum dryers are commonly used drying equipment, mainly
used for drying materials with high humidity. To ensure the normal operation of
the drum dryer, it is necessary to perform debugging installation and regular
maintenance. Here are some common debugging installation and maintenance
measures:
Debugging installation:
Before installation, check whether the equipment's
appearance is intact and whether the connections are firm. Before installation,
check whether power supply lines, compressed air lines, etc. are properly
connected and meet safety standards. The foundation of the drum dryer should be
firm, the base should be level, and the equipment should be placed vertically
to ensure normal operation. The rotation components of the drum dryer should be
able to rotate freely, and the drum should be parallel and symmetrical at both
ends. Before the trial operation, inspect and clean the equipment.
Maintenance:
Clean the interior and exterior of the drum dryer daily
after use, especially the surface of the drum and rotor. Regularly check
bearings and transmission components and maintain proper lubrication. Regularly
check the operation of heaters, fans, motors, and other components. Inspect the
wear of the drum and rotor and replace them promptly if worn. Check whether the
exhaust duct is unobstructed to ensure normal discharge of moisture. Check
whether the control system and safety devices are operating normally to ensure
the safety performance of the equipment.
In summary, proper debugging installation and maintenance can extend the service life of the drum dryer, improve the efficiency and stability of the equipment, and provide good assurance for production.
